Download Print this page

Craftsman 973.114150 Operator's Manual page 3

3/8 in., 16.8 volt cordless drill-driver variable speed / reversible

Advertisement

Yourdrill-driver h asmany features formaking yourdrilling
operations m orepleasant a ndenjoyable. Safety,
performance anddependability havebeen giventop
priority inthedesign ofthisdrill-driver m aking it easyto
maintain andoperate.
CAUTION:Carefully readthrough thisentire
operator's m anual before usingyournewdrill-driver.
Paycloseattention t o theGeneral SafetyRules,
Specific S afetyRules
/ Symbols, Warnings and
Cautions. If you use your drill-driver properly and only
for it's intended use, you will enjoy years of safe,
reliable service.
_L
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal
injury.
SAVE THESE
INSTRUCTIONS
Work Area
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders,
children, and visitors away while
operating
a power tool. Distractions can cause you
to lose control.
Electrical
Safety
Do not abuse the cord. Never use the cord to carry
the charger. Keep cord away from heat, oil, sharp
edges, or moving parts. Replace damaged cords
immediately. Damaged cords may create a fire.
A battery operated tool with integral batteries or a
separate battery pack must be recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may create a
risk of fire when used with another battery. Use battery
only with charger listed.
MODEL
BATTERY PACK
CHARGING ASSEMBLY
973.114150
ITEM NO. 9 11368
ITEM NO. 9 11369
(1323414)
(1425009)
Use battery operated tool only with specifically
designated battery pack. Use of any other batteries
may create a risk of fire. Use only with battery pack
listed.
Personal
Safety
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is in the
locked or off position before inserting battery
pack. Carrying tools with your finger on the switch or
inserting the battery pack into a tool with the switch on,
invites accidents.
Remove adjusting keys or wrenches before turn-
ing the tool on. A wrench or a key that is left attached
to a rotating part of the tool may result in personal
injury.
Do net overreach. Keep proper footing
and bal-
ance at all times. Proper footing and balance enables
better control of the tool in unexpected situations. Do
not use on a ladder or unstable support.
Use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
3

Advertisement

loading