Know Your Drill Press; Glossary Of Terms - Craftsman 137.229130 Owner's Manual

Speed control knob Speed chart Belt guard cover
Upper stop nut
Lower stop nut
Depth scale
Fence end_
Fence backstop
Motor
Power
cord
Depth stop
Stop nut
Light switch
Chuck key
storage
Table
support lock
Bevel
scale
Table arm
ON/OFF switch
Chuck
Feed
handles
Column
Table
Head locking
set screws
Column
collar
Rack
Table
support
Table bevel lock
Table lock Table
crank
5/8" Threaded drain
Spindle
0° Locking
Quill set screw
'" Arbor
_ Chuck
Chuck key
Column support
Base
BASE - Supports the drill press. For additional stability,
holes are provided in the base to bolt the drill press to the
floor. (See "Specific Safety Instructions for Drill Presses".)
BACKUP MATERIAL -A piece of scrap wood placed
between the workpiece and table. The backup board
prevents wood in the workpiece from splintering when the
drill passes through the backside of the workpiece. It also
prevents drilling into the table top.
BELT GUARD ASSEMBLY -Covers the pulleys and belt
during operation of the drill press.
BEVEL SCALE - Shows the degree of table tilt for bevel
operations. The scale is mounted on the side of the arm.
CHUCK - Holds the drill bit or other recommended accessory
to perform desired operations.
CHUCK KEY -A self-ejecting chuck key which will pop out
of the chuck when you let go of it. This action is designed
to help prevent throwing of the chuck key from the chuck
when the power is turned ON. Do not use any other key as
a substitute; order a new one if damaged or lost.
COLUMN - Connects the head, table, and base on a
one-piece tube for easy alignment and movement,
COLUMN COLLAR - Holds the rack to the column. Rack
remains movable in the collar to permit table support
movements.
COLUMN SUPPORT -Supports the column, guides the
rack and provides mounting holes for column to base,
DEPTH SCALE STOP NUTS - Lock the spindle to the
selected depth.
DEPTH SCALE - Indicates depth of hole being drilled.
DRILL BIT -The cutting tool used in the drill press to
make holes in a workpiece.
DRILL ON/OFF SWITCH - Has locking feature, This
feature is intended to help prevent unauthorized and possible
hazardous use by children and others. Insert the key into
the switch to turn the drill press on.
FEED HANDLE - Moves the chuck up or down.
FENCE -Attaches to the table to align the workpiece or for
fast repetitive drilling. Removable. Remove fence when it
interferes with other drill press accessories.
HEAD LOCKS - Locks the head to the column, ALWAYS
lock the head in place while operating the drill press.
RACK -Combines with gear mechanism to provide easy
elevation of the table by the hand operated table crank.
REVOLUTION PER M_NUTE (R.P.M.) - The number of
turns completed by a spinning object in one minute.
SPEED CONTROL CHART - Choose the drilling speed by
moving the knob lever's location on the chart.
SPEED CONTROL KNOB - Changes the drilling speed
when moved.
SPINDLE SPEED -The R.RM. of the spindle.
TABLE SUPPORT LOCK -Tightening locks the table
support to the column. Always have it locked in place while
operating the drill press.
TABLE - Provides a working surface to support the
workpiece,
TABLE ARM - Extends beyond the table support for
mounting and aligning the table.
TABLE BEVEL LOCK - Locks the table in any position
from 0 °- 45 °.
TABLE CRANK - Elevates and lowers the table. Turn
clockwise to elevate the table. Support lock must be
released before operating the crank.
TABLE LOCK - Locks the table after it is rotated to
various positions.
TABLE SUPPORT - Rides on the column to support the
table arm and table.
THREADED DRAIN (5/8") -Attach a 5/8" (pipe threaded)
metal pipe to the threaded opening for draining excess oil
into container. For a non-draining surface attach a threaded
metal plug. Pipe and plug not included,
WORKPIECE -Material being drilled.