Tools Needed - Craftsman 315.212350 Operator's Manual

LASERTRAC
TM
LASER GUIDE
For more accurate cuts, a LaserTrec
TM
laser guide is
included with your miter saw. When used properly,the
laser guide makes accurate, precisioncutting simpleand
easy.
POSITWE STOPS ON MITER TABLE
Positivestops have been provided at 0°, 15", 22-1/2 °,
31.62 °, and 45 ° on both the left and right side of the miter
table.
BEVEL LOCK KNOB
The bevel lock knob securely locks your compound miter
sew at desired bevel angles.A positive stop adlustment
screw has been providedon each aide of the saw arm.
These adjustment screwsaro for making fine adjustments
at O"and 45",
ELECTRIC BRAKE
An electric brake has been prov/ded to quickly stop blade
rotationafter the switch is released.
CROWN MOLDING STOP
The crown molding stop makes positioningcrown molding
verticallyagainst the fence easier.
SLIDING MITER FENCE
Hold the workplace securelyagainst the miter fence when
making all cuts. The s_k_ing feature allows both fences 0eft
and right)to be moved when making bevel or compour_d
cuts,
Slide the mltar fences by looseningthe fence screws.
Once the desired positionof the miter fence is deter-
mined, retightenthe fence screwsto securethe sliding
lense.
SELF-RETRACTING LOWER BLADE GUARD
The lower blade guard Is made of shock-resistant,see-
through plasticthat providesprotectionfrom each side
of the blade. It retractsover the upper blade guard as the
saw Is lowered Into the work.piece.
ROLLER SUPPORT
With the rollersupport installed,the workplace will glide
smoothlyand levellyover the table extensions.
The followingtools/,not Included} are needed for checking adiustlnentsof yoursaw or for installing the blade:
COMBINATION WRENCH (2)
10 turn,14mm
COMBINATION SQUARE
FRAMING SQUARE
PHILLIPS SCREWDRIVER FLg.5
12