Operation; Applications - Craftsman 315.212350 Operator's Manual

This caw hasthree scale indicators,two on the bevel
scale and one on the miter scale. After squadng adjust-
ments have been made, it may be necessaryto loosen the
indicator screws and reset them to zero.
FENCE
• BLADE
COMBINATION
SQUARE
MITER
TABLE
VIEWOFflLADE NOTSQUARE WITHMITER
TABLE, ADJUSTMENTS AREREQUIRED
Fig. 32
_k WARNING: Do not allow familiarity with tools to
make you careless. Remember that a careless frac-
tion of e second is sufficient to inflict severeinjury.
_k WARNING: Alwayswsar safety goggFsa or safety
glasseswith side shieldswhen operatingtools. Fail-
um to do so could resultin objects being thrown _nto
your eyes resultingin possibleseriousInjury.
_, WARNING: Do not use any attachments or acces-
sories not recommended by the manufacturerof
this tool. The use of attachments or accessoriesnot
recommended can resultin seriouspersonal inlury.
CAUTION: Do not start the compound miter caw
without checking for interference between the blade
and the throat plate. Damage couid resultto the
blade if it strikes the throat plate dudng operationof
the saw,
APPLICATIONS
This product hasbeen designedonlyfor the purposes
)}stedbelow:
• Cress cutting wood and plastic
• Cross cuffing miters, joints,etc. for pictureframes
moldings, door casings, and fine jolnery
• Beve_cu_.tin9 and compouncL cuing
NOTE: The blade provided is fine for most wood cutting
operations,but for fine Joinerycuts or cuttingplastic, use
one of the accessory blades avaiisb_e from your nearest
Sears retailstore.
_k WARNING: Beforestarting any cutting operation,
clamp or bolt the compound miter saw to a work-
bench, Never operate the miter saw on the floor or in
e crouched posit'ion. F ailureto heed this warning can
resultIn sedouspersonalinjury.
23