Viewing The Current Status; Configuring Automigration Job Reports - HP StorageWorks 6000 - Virtual Library System User Manual

5. Select Submit.

Viewing the Current Status

To view the current status of jobs:
1. Select the Automigration/Replication tab.
2. In the navigation pane, select Job reporting.
The screen opens to the Current Status report which displays information on all pending and active
automigration jobs. The report includes:
• Barcode
• Start time
• Percent complete
• Time of the last update
• Source and target locations
• The node the job is running on
• Completion status
You can sort by any of these criteria by clicking the column header.

Configuring Automigration Job Reports

The Configuration screen allows you to assign default settings for reports.
1. Select the Automigration/Replication tab.
2. In the navigation pane, expand Job reporting.
3. Select Configuration.
You can customize the following defaults:
• Refresh time for the display (1 to 15 minutes)
• Duration of the job status graphs to display (1 to 90 days)
• Reporting data retention period (1 to 90 days)
• Duration of the CSV format export file (1 to 90 days)
• Name for the CSV format export file
You can also create a pre-defined custom view based on the locations you choose:
1. Select a location category.
2. Select the specific locations of interest from the Available Locations box. You can select multiple
devices by using Ctrl+click.
3. Using the >> button, or by double-clicking, move the locations of interest into the Selected Locations
box. These are the locations that will display in the report. You can use << button to remove
locations from the Selected Locations box.
4. Select another location category and repeat steps 2 and 3.
5. Enter a name for this view in the Create a New View field.
6. Select Create View. This view is now available as a selection in the Views list on the Job History
screen.
HP StorageWorks 113