HP StorageWorks 7110 - Virtual Array Installation Instructions

GBIC Installation Instructions for VA 7100
Removing a GBIC
1. Remove the fiber optic cable (FIG. 1, 1).
2. Push in the GBIC tabs (4) and gently pull it out of the HOST FC slot (5).
Replacing a GBIC
1. Remove the GBIC connector cover.
2. With even pressure, gently push the GBIC into the HOST FC slot (FIG. 1, 5) until it clicks into
place.
3. With the cable connector keys (2) facing up, gently insert the fiber optic connector (1) into the
GBIC (3) until it clicks into place.
2
FIG. 1
4
3
1
5
1