Gigabyte GA-MA790FX-UD5P User Manual page 80

B. Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup .
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test).
Under Integrated Peripherals, to enable RAID for the SATA2_0/1/2/3 connectors, set OnChip SATA
Type to RAID. To enable RAID for the SATA2_4/SATA2_5 connectors, set OnChip SATA Type to RAID
and set OnChip SATA Port4/5 Type to As SATA Type (Figure 1).
OnChip IDE Channel
OnChip SATA Type
OnChip SATA Port4/5 Type
Onboard SATA/IDE Device
Onboard SATA/IDE Ctrl Mode
Onboard Audio Function
 Onboard LAN device
Onboard 1394 Function
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move
Enter: Select
F5: Previous Values
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
GA-MA790FX-UD5P Motherboard
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled]
[RAID]
[As SATA Type]
[Enabled]
[IDE]
[Enabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
F10: Save
Figure 1
- 80 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults