Gigabyte GA-MA790FX-UD5P User Manual page 45

SB/HT Voltage Control
Allows you to set the South Bridge/HT Link voltage.
Normal
+0.1V ~ +0.3V
NB/PCIe/PLL Voltage Control
Allows you to set the North Bridge PCIe PLL voltage.
Normal
+0.1V ~ +0.3V
CPU PLL Voltage Control
Allows you to to set CPU PLL voltage.
Normal
2.500V~3.100V
DDR VTT Voltage Control
Allows you to to set memory VTT voltage.
Normal
0.900V~1.200V
NB Voltage Control
Allows you to set the North Bridge voltage.
Normal
1.100V~1.600V
CPU NB VID Control
Allows you to set the CPU Northbridge VID voltage. Auto sets the CPU Northbridge VID voltage as
required. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
CPU Voltage Control
Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
(Note) This item is present only if you install a CPU that supports this feature.
Supplies the South Bridge/HT Link voltage as required. (Default)
Increases South Bridge/HT Link voltage by 0.1V to 0.3V at 0.1V increment.
Supplies the PCIe PLL voltage as required. (Default)
Increases PCIe PLL voltage by 0.1V to 0.3V at 0.1V increment.
Supplies the CPU PLL voltage as required. (Default)
Adjusts the CPU PLL voltage, ranging from 2.500V to 3.100V.
Supplies the memory VTT voltage as required. (Default)
Adjusts the memory VTT voltage, ranging from 0.900V to 1.200V.
Supplies the North Bridge voltage as required. (Default)
Adjusts the North Bridge voltage, ranging from 1.100V to 1.600V.
(Note)
- 45 - BIOS Setup