Gigabyte GA-MA790FX-UD5P User Manual page 28

8) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Connectors, Controlled by AMD SB750, Yellow)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s
standard. Each SATA connector supports a single SATA device. The AMD SB750 controller
supports RAID 0, RAID 1, RAID 5, RAID 10 and JBOD. Refer to Chapter 5, "Configuring SATA Hard
Drive(s)," for instructions on configuring a RAID array.
• A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard
drives are to be used, the total number of hard drives must be an even number.
• A RAID 5 configuration requires at least three hard drives. (The total number of hard drives
does not have to be an even number.)
• A RAID 10 configuration requires at least four hard drives and the total number of hard
drives must be an even number.
GA-MA790FX-UD5P Motherboard
SATA2_0 SATA2_2
7
7
SATA2_1 SATA2_3
- 28 -
Pin No.
1
SATA2_4
2
1
3
4
5
1
6
SATA2_5
7
Please connect the L-shaped end
of the SATA 3Gb/s cable to your
SATA hard drive.
Definition
GND
TXP
TXN
GND
RXN
RXP
GND