Pc Health Status - Gigabyte GA-MA78LM-S2 User Manual

2-9

PC Health Status

Hardware Thermal Control
Reset Case Open Status
Case Opened
Vcore
DDR2 1.8V
+3.3V
+12V
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Smart FAN Control
CPU Smart FAN Mode
hi : Move Enter: Select
F5: Previous Values
Hardware Thermal Control
Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and
ratio will be reduced when the CPU is overheated. (Default: Enabled)
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR2 1.8V/+3.3V/+12V
Displays the current system voltages.
Current System/CPU Temperature
Displays current system/CPU temperature.
Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90 C/194 F.
o o
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
PC Health Status
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled]
[Disabled]
No
1.376V
1.872V
3.328V
12.112V
30 C
o
47 C
o
3375 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
F10: Save
- 49 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
C/140 F, 70 C/158 F, 80
o o o o
C/176 F,
o o
BIOS Setup