Chapter 2
Setup
2.1 Setup Flow
Before using the printer, you need to set various settings to increase the printer's functionality.
Configure the printer appropriately depending on the environment.
Determine how to install the printer (install it vertically or horizontally)
Rev. B
TM-L90/TM-L90 with Peeler Technical Reference Guide
↓
Set the Roll Paper Near-End Detector
↓
Connect the power supply
↓
Autocutter settings (TM-L90 only)
↓
Set the Roll Paper width
↓
DIP switch settings
↓
Memory switch settings
↓
Set the Paper layout
Setup 2-1