Chery SQR7240T User Manual page 43

Table of Contents

Advertisement

Scanning playback
● Each track will be played for 10 seconds, as displayed below,
when SCN is pushed during playback.
● Return to normal playback mode when the SCN button is pushed
again.
Select previous/next album
● Push the <D
> button for short to select the previous album,
and push the <D
> button for short to select the next album, as
displayed below:
When a special album is pitched on, it is displayed below:
Notice:
1. Don't pull out a USB disk forcibly when files of the USB disk
are played, because your files may be damaged in this way. You'd
better insert or pull out a USB disk when the host is shut down.
2. Don't extend the USB connecting line provided by manufacturer
with another extension cord, because the USB protocol has high
demands for length, impedance, time delay, etc. of cables & wires.
Otherwise, the machine may fail to read the USB disk.
Setup
You can modify initialization setup to your taste:
● Push the SET button for 2 seconds at least to enter into the menu
of SETUP.
● Push the
or
button to select the options you desire to
modify.
● Push the SET button for option modification.
● Push the SET button for 2 seconds at least to exit from the menu
of SETUP.
The machine will exit from the mode of SETUP automatically
approximately 1 minute after your last operation.
Audio

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sqr7180b11Sqr7240Sqr7200tSqr7200Sqr7201b11Eastar

Table of Contents