Luggage Conveyance - Chery Karry series User Manual

Rear row seats
There are two rear row seats, which are
symmetrically left to right as shown in the
figure below.
Front groove
Rear groove
Removing and assembling method
for rear row seats
Removal: Pull the pull rod in the figure
below and push it forward with hand, draw
the rear row seats with another hand
upward, and then pull the seat backward to
remove it.
DO NOT exceed the height of
front row seat when stacking
articles such as luggage.
DO NOT let passengers sit on the
folded seatback during
because unbonded luggage on the
folded seatback and
without protection device may collide
inside the vehicle or may be thrown
out of the vehicle in sudden brake or
accident, which may result severe
injury or death.
Assembly: Align two grooves in the front
of the seat with two corresponding rings in
the vehicle, put down the seat with slight
force to make the two grooves clipping in
place. In addition, shake the seat to check
whether it fixed firmly.

Luggage conveyance

The rear part of vehicle may have enough
space to accommodate luggage by folding
the middle row seat.
Pull
driving,
passengers
luggage
dangerous to drive the vehicle with
opened tailgate. Excessive exhaust
gas may be inhaled in the vehicle
through the opened luggage boot
door.
Safety
Luggage and other loaded
articles shall be placed as
forward as possible in the
boot. It is extremely
68