Advertisement
Troubleshooting (continued)
Burner(s)will not light
usingignitor.
(See ElectronicIgnition
Troubleshooting a lso)
Burner(s)will not
matchlight.
Suddendrop in gas
flow or low flame.
Flamesblowout.
Flare-up.
ELECTRONIC IGNITION:
• Nospark,no ignitionnoise.
• Nospark,someignitionnoise.
, Sparks,but notat electrodeor at full
strength.
• See"GAS ISSUES:"on previouspage.
• Matchwill not reach.
• Impropermethodof match-lighting.
Unableto fill LP
cylinder.
One burnerdoes not
lightfrom other
burner(s).
Timerdoesnot work
(Greenlightdoesnot
flash)
, Outof gas.
• Excessflow valvetripped.
•Vaporlock at couplingnut/LPcylinder
connection.
• Highor gustingwinds.
• Lowon LP gas.
• Excessflow valvetripped.
• Greasebuildup.
• Excessive fat in meat.
• Excessive cookingtemperature.
• Greasetrappedby foodbuilduparound
burnersystem.
• SeeSectionI of ElectronicIgnitionSystem.
• SeeSectionII of ElectronicIgnitionSystem.
• SeeSectionIII of ElectronicIgnitionSystem.
, Uselong-stemmatch(fireplacematch).
• See"Match-Lighting" s ectionof Useand Care.
• Checkfor gasin LP cylinder.
•Turnoff knobs,wait 30 secondsand lightgrill. If flamesare still low,
turnoff knobsand LP cylindervalve.Disconnectregulator.
Reconnect r egulatorand leak-test.Turnon LP cylindervalve,wait
30 secondsand thenlightgrill.
•Turnoff knobsand LP cylindervalve.Disconnectcouplingnutfrom
cylinder.Reconnect a nd retry.
•Turnfront of grill to face windor increaseflameheight.
• RefillLP cylinder.
• Referto "Suddendrop in gasflow"above.
• Cleanburnersand insideof grilltfirebox.
•Trim fat from meat beforegrilling.
•Adjust(lower)temperatureaccordingly.
•Turnknobsto OFF.Turngas off at LPcylinder.Leavelid in position
and let fire burnout.After grill cools,removeandcleanall parts.
Persistent g reasefire.
Flashback...
• Burnerand/orburnertubesare blocked.
•Turnknobsto OFF.Cleanburnerand/orburnertubes.See burner
(firein burnertube(s)),
cleaningsectionof Use and Care.
• Somedealershaveolder fill nozzles
•The wornnozzlesdon'thaveenough"bite"to engagethe valve.Try
withworn threads,
a secondLPdealer.
• Cleancarry-overtube(s)with wirebrush.
• Greasebuildupor foodparticlesin
end(s)of carryovertube(s).
•
DeadBattery
•
Batteriesinstalledincorrectly.
•
Knob Position did notstart the Clean
Cycle
•
Replacebatteries
•
Installbatteriescorrectly.
•
PushKnobin to startthe cleancycle.(GreenLEDshouldbeginto
flash)
No LED'swill illuminate
•
DeadBattery
•
Replacebatteries
•
LowBatteryStrength
RedLED nextto battery
symbolis illuminated
•
Prepareto replacebatteries(NOTE:Cleancyclewill operatewith
a weak battery.
26
Advertisement
