10. When setup is finished, select
. Leave in the CD-ROM.
Finish
When your computer restarts, you see the Found New Hardware
Wizard again. Follow the steps in the next section to install the
SP 785EPX Storage Device driver.
Installing the Storage Device Driver
After you install the printer driver and utilities, Windows recognizes the
card slot in the printer. Follow these steps to install the Storage Device
driver:
1. When you see the Found New Hardware Wizard, click
the Install Hardware Device Drivers window.
2. Select
search for a suitable driver for my device
You see the Locate Driver Files window.
3. Select
Specify a location
and
drives
CD-ROM drives
4. Click
then locate the
Browse,
\Drivers\Win2000
5. When you see a window like the following, click
6. Follow the instructions to complete the installation.
7. When you see a message that the Storage Device installation is
complete, click
Finish
8. When you see a message asking if you want to restart your computer,
click
. Leave in the CD-ROM as your computer restarts.
Yes
Now you're ready to register your printer, install your photo software
(optional), and check out your on-screen Reference Guide. See number 8
on the Start Here sheet for instructions.
to restart your computer and click
Yes
, and make sure you uncheck
. Then click
EPUSBSTO.INF
folder on your printer CD-ROM and click
.
You see
Next.
and click
Next.
Floppy disk
.
Next
file in the
Open
:
OK
.
89