Printing On Card Stock Or Matte Board - Epson Stylus Photo 960 Basic Manual

You can print three density patterns on one disc. Each pattern is printed in a
different location.
After the first pattern is printed, adjust the setting, then repeat steps 4 through 6,
selecting
If you want to try a third Color Correction setting, you can repeat steps 4 through
6 again and select
7. Remove the CD or DVD and let it dry for at least 24 hours. Then check the
saturation levels again.
Note: You can also use the Brightness and Contrast settings in Print CD to adjust
color saturation. See page 45 for instructions.

Printing on Card Stock or Matte Board

You can use the front sheet feeder to print on white card stock or matte board up to
1.3 mm (.051 inch or 51 mil) thick, in the following sizes: letter, legal, or A4. You can
also use the front sheet feeder to print on premium papers if necessary.
Before you start, turn off the printer and remove the roll paper holder and cutter, if
they're installed (see page 41 for instructions). Then turn the printer back on. (The
printer must be on to load card stock correctly.)
1. Push in the output tray extensions, but leave the tray open.
54
Printing on Roll Paper, CDs, DVDs, and Card Stock
or
Second Second Time
or
Third Third Time
to print the second pattern.
.