Loading Paper In The Sheet Feeder - Epson Stylus Photo 960 Basic Manual

Loading Paper in the Sheet Feeder

Follow these steps to load plain paper and many special papers in the sheet feeder:
1. Slide the left edge guide to the position for your paper size, as marked on the
paper support.
2. Place your paper in the printer on
the right side of the sheet feeder.
3. Adjust the left edge guide to fit
snugly against the paper.
4. Open the output tray extensions.
Also follow these loading guidelines:
Always load the short edge first,
even for printing landscape-
oriented documents and photos.
Load the printable side face up. It's usually whiter or brighter than the other side.
Load letterhead or preprinted paper into the printer top edge first.
Don't load paper above the arrow marks inside the edge guides.
Check the paper package for additional handling instructions.
Make sure the adjust lever is set to
the m position.
If ink smears on thicker paper, try
printing with the lever set to the
^ position.
20
Printing on Macintosh
Adjust lever
Load paper against
this side