Creating A Patch (Edit Mode); Activating Edit Mode; Editing A Patch - Zoom Player 1010 Operation Manual

INPUT COMP&WAH
1 COMPRESSOR & WAH
FP01
As shown in the illustration above, a patch of the 1010
contains parameters for the five types of effect modules
and the patch level settings. In the Edit mode, you can call
up any of these parameters and change them.

Activating Edit Mode

1.Select the desired patch in the Play mode (from the
USER group or the PRESET group).
For details on how to select a patch, please refer to page 4.
NOTE
2.Press the EDIT key.
The 1010 is now in the Edit mode. The flashing module
indicator shows which effect module is selected for
editing, and the flashing parameter indicator shows which
parameter within the module is selected for editing.
3.Pressing the EDIT key once more returns the 1010 to
the Play mode.
COMP WAH DISTORTION
DIST COLOR DIST COLOR
SENS
1-16 1-16
0-10
ATTACK GAIN
0-10 1-16
TONE
TONE-WAH TONE-WAH TONE
0-10-P1-P5 0-10-P1-P5 0-10 0-10
PATCH LEVEL ZNR
0-30 0-5
COMP
DIST
WAH

Creating a Patch (Edit Mode)

DISTORTION
1 RHYTHM
2 Classic OD
3 Valve OD
4 Vintage DRIVE
5 DRIVE Master
6 FUZZ
7 Power LEAD
8 METAL T
AMP SIM
EQ VOL CHO/FLG REV/DLY
PRESENCE 1:CHO 3:DBL 1:CHO 3:DBL 1:HALL
0-(5)-10 2:FLG 2:FLG 2:ROOM
HIGH DEPTH DEPTH TIME
0-(5)-10 0-10 0-10 1-10
MID TONE
MID RATE RATE RATE TONE
0-(5)-10 0-(5)-10 1-20 1-20 0-10 0-10
1-20
LOW FEEDBACK FEEDBACK
0-(5)-10 0-10 0-10
CHO REVERB
EQ
FLG
TUNER
(1)
Patch
EQ CHO/FLG
9 1 EQUALIZER
10
11
12
13
14
15
16
FP01
Panel display in Edit mode
In the Edit mode, the following information is shown.
(1) Effect module on/off
The module cursor indicators of effect modules which are
ON in the selected patch are lit.
(2) Parameter type
The type of the parameter currently selected for editing is
indicated by the cross point of the flashing module cursor
indicator and parameter cursor indicator.
(3) Parameter value
The value of the parameter currently selected for editing is
shown on the display.

Editing a Patch

1.Press the EDIT key to activate the Edit mode.
2.Use the MODULE SELECT
module you wish to edit.
(2)
PARM
3:DLY
1
TIME PARM
0-42( 10mS)
2
FEEDBACK PARM
FEEDBACK
0-10 0-10
3
MIX PARM
0-10
4
DELAY
REV/DLY
1 CHORUS 1 HALL
2 FLANGER 2 ROOM
3 DOUBLING 3 DELAY
PATCH LEVEL
(3)
RATE
BANK PATCH
1-20
1 6
BOTH WAH ON
OUTPUT
key to select the effect