Storing A Patch; Turning Effect Modules On And Off; Compare - Zoom Pro 4040 Operation Manual

Turning effect modules on and off

In the Edit mode, each effect can be turned on and off
independently from others.
• Pressing a pedal corresponding to an effect module
that is currently on (pedal switch LED and effect
module cursor LED are lit) turns the effect module off.
The LED goes out. Press the pedal again to turn the effect
back on.
The effect module on/off setting can also be stored
HINT
as part of a patch.

Compare

During editing, it is possible to temporarily return to the
setting that was active before starting the editing process.
This is called the "compare" function.
• In the Edit mode, press the GROUP key.
The previous value of the parameter where the cursor is
currently located and the indication "CP" appear alternately
on the display.
• Press the GROUP key once more.
The 4040 returns to the Edit mode.
The compare function is useful for example to check
HINT
how a certain parameter change affects the overall
sound. When the parameter is selected with the
PARAMETER SELECT keys, the value of that
parameter is shown on the display.

Storing a Patch

If an edited patch (or a patch whose patch level setting was
changed in the Play mode) is not stored, the change will be
lost when another patch is selected. To preserve a setting,
store the patch as described below.
• Press the STORE key in the Play mode or Edit mode.
The unit is now in the store standby condition, and you
can choose the bank number and patch number in which
you want to store the patch.
12
For patches from the PRESET group, changed
NOTE
parameters cannot be stored. Therefore, even if a
patch was chosen from the PRESET group, the store
destination will automatically become "U" (USER
group) if a parameter was changed.
• Use the BANK
to specify the bank number and patch number.
If no input is made, the patch will be stored in the original
bank number and patch number.
When a patch is stored, the patch that was previously
NOTE
stored in that number will be overwritten (erased).
Take care not to erase a patch that you want to keep.
When wishing to restore the factory preset patches,
please refer to the explanation on page 25.
• Press the STORE key again. The patch is stored, and
the 4040 reverts to the Play mode.
If the STORE key has not yet been pressed for the
NOTE
second time, you can use the EDIT/CANCEL key to
cancel the store process and return to the
immediately preceding mode.
pedals and pedal switches 1 – 4