Advertisement
Adding Channel Tconsand Labels tn the 2-5-4 + Menu Mode
Editing/Adding Channel [CONs and/or LabeLs
If there is flo pre-assigned ICON, you can make a channel, [abel of up
to 7 characters to he_ in identifying
the channel or network,
At your option, channe{ [abeLs can also be added in addition to a
preassigned iCON, You may also add _beis for the Aux input sources
to clearly identify the devices that ale connected to the Aux inputs.
(Icon)
1234567
Editing and adding the labe{s can only be done if there are
charmed enteled into tile L26W58HA's channel map either by
using the method described in item 6 (page 51), by cloning or
by the use of the master [emote control flora the PP¢ providec
To Do Channel Editing/Labeling,
proceed as follows
1. Enter L26W58HA InstalLer menu.
2. After the instaLLer menu appears, press '2', '5', W, 'MENU'.
This enters the channel Label edit mode.
Add your channel _cons and channel LabeLsin tMs menu,
see below. (You can do tMs more than once.)
3. To exit the menu when done press "MENU".
Changing
a Channel's
ICON on Master
TV
1,W_th Channel Up/Down, select the channel
you want to d'lange the Icon for.
2.With the Right or Left ADJ arrow, select
the letter '1' on the channel ID display.
3,W_th the Up or Down arrow, select the
desired [CONyou want to appear to
identify the channel
(if you know the
ICON number, enter the number followed
by Enter / SeLect.)
Note: [f no icon is available, leave at or
select the default blank icon display,
4, Proceed with Changing/Adding
LabeLsor
go to the next channel
Changing/Adding
Channel
Labels on
Master
TV
1. Channel Up/Down to select the desired
channel.
2. Press the Right or Left AD_ arrow
repeatedly until the numbers i to 7 show
up. The number shows the position of the
character that can be changed. Number t
is the first character; number 2 the second
character and so on.
3,With the Up or Down arrow, select the
desired character;
4. Proceed to the next number position or
use Channel Up/Down to 9o to the next
channeL.
Changing Source
Labels on Master
TV
i. Press "TV/I_V" to sdect the desired Aux
input source; Video % Component, S-Video
etc.
2. Press the Right or Left arrow repeatedly
until the numbers 0 to 9 show up.
The number shows tile position of the
character that can be changed.
3. Use the Up or Down arrows to select the
desffed character.
4. Press "TV/AV" [or the next Aux source or
proceed with Changing icon or
Chang_ng/'Adding [ abels.
[nstalter
Remote Control Key Functions for Master TV Channel Edlting/Labetlng
Menu
* CHANNEL Up/Down - Tunes in the next channel in scan.
. Left/Right
Arro_
Select the item to change. Tf "[" is shown,
the [CON can be changed, If a number is shown, it indicates tile
position of the character that can be changed,
" Up!Down Arrows - Select tlle [CON or the character to be
displayed.
• 0 - 9 - Use to enter the index number of the [CON, if known.
• OK (Enter/Seres)
_ Changes the [CON after the number has been
entered.
Q TV/AM o Changes the Aux input label
This key is Located on side
of set and on Installer
remote control
• MENU o Exits the Labe[ing/edlting
menu.
PAGE
53
Advertisement
