Zenith Sentry 2 Z25X22 Operating Manual & Warranty page 10

.L
• I I
il. cONNECT THE POWER " *
! ?QUICKSETUP GUIDE • ii; : .
"r_,
I . " J •
._-TER you have connected the necessary cable(s)to the
jacks on the back of the TV, plug your TV's power cord into a
standard AC power outlet for 120 volt, 60Hz. AC current.
Make sure you do not plug the TV into an outlet controlled by
a switch.
Turn on the TV by using the On/Off switch on the TV.
.,q
2. INSTALL THE BATTERIES INTO THE REMOTE
Install the batteries that are provided with your remote.
The remote cc)mes set with Zenith codes• If you'd like to use the remote to operate c)ther brands of equipment, you will need to pro-
gram the codes for that equipment into the remote.
1. Open the battery compartment by pressing in on the tab and lift-
ing the cover off.
2. Place the batteries into the compartment, matching plus with
plus (+ with +) and minus with minus (- with -).
3. Replace the cover.
Pushtab in
Use 2 size AAA batteries
3. (Required) USE AUTO PROGRAM
The first time you turn on your TV, use Auto Programto find all
available channels.
1. Press MENU repeatedly to view the Setup Menu.
2. Select Auto Program using the Up/Down arrows.
3. Use the I,eft/Right arrows to advance to the next menu.
4. Select OFF AIR ANTENNA if you have an antenna or CABLE
TV if you have cable TV.
5. Use theLeft/Right arrows to begin the channel search.
_ etup Menu
Auto Program
Add/Del/Surf
Oh. Labels
C],ock Set
Timer Setup
Parental CII
Caption/Text
Language
A_uto Demo
l'<l_ To Program
]
Setup Menu with Aulo Program Highlighted
__ Ch Is Founo ets Four_
These typical screens appear while
the channel search is in process.
3205-0
2ml