Vcr Operations - Zenith System 3 Operating Manual & Warranty

REMOTE CONTROL MBR3420
VCR OPERATIONS
The following functions and operations apply to Zenith
VCR models built after 1988. The remote control suppfied
with your VCR may have keys not duplicated on the new
remote. If these functions are desired, the original remote
control will have to be used.
For complete details on how to operate your Zenith VCR,
refer to the operatingguide supplied with it.
The remote control mustbe in the VCR mode to operate
your VCR.
MODE
Press repeatedly to select the
VCR mode of operation.
VCR
Lights when VCR mode of operation
is selected.
MENU, SELECT, ADJUST and QUIT |
Used with the on-screen menus and
programming options of the VCR. See
VCR operating guide for details
Numbered Buttons
!
Used to select a TV channel through |
the VCR. Also, used to set the timer in
the VCR, and to enter programming
information.
ENTER
Used with the numbered buttons to
select a TV channel through the VCR.
AM/PM
Used to set timer during programming.
MEMORY
Used to activate the VCR MEMORY
feature. See VCR operating guide for
details.
/
RECORD, STOP, PAUSE, SEARCH, "
REW, PLAY and F FWD
Used for tape recording and playback
functions. See the VCR operating guide
for details.
For optimum performance, point the
remote control toward your VCR. ,
" l,
Remote Control MBR3420
VCR Operations
/
/
I
/
OFF/ON
Used to turn VCR ON or OFF.
FLASHBK (Flashback)
Press during VCR playback to view the
channel tuned by the VCR.
CHANNEL Up/Down
Used to select a'IV channel by going
Up or Down through channels from the
VCR.
TIMER
Activates TIME RECORD on
some VCRs.
TV/VCR
Used to select the source of the
programs seen on the TV. Switches the
VCR between TV mode and VCR
mode. TV Mode: channels are selected
through the "IV. VCR Mode: channels
or tape operation are selected through
the VCR.
2592,o 5 -- 3