Zenith Z42P3 Installation And Operation Manual page 32

Operation
- Sets a label to each input source
or lets you skip the input source
which is not in use when you
press INPUT button.
1 Press the MENU button and then use J,/T button to select the SETUP menu.
2 Press the _ button and then use J, / T button to select Input T-abel.
3 Press the _ button and then use A / T button to select the source: AV1 -
2, Component1-2, RGB-PC, HDMI1/DVI or HDMI2.
4 Press the _ / _ button to select the label.
5 Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
32