Zenith Z42P3 Installation And Operation Manual page 10

Introduction
Remote Control Key Functions
TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI, and
HDMI2 input sources, screen returns to the last TV channel.
iNPUT
POWER
External input modes rotate in regular sequence: TV, AV1 -
2, Component 1-2, RGB-PC, HDMI1/DVI, and HDMI2.
(AV 1-2, Component 1-2, RCB-PC , HDMI1/DVI, and
HDMI2 input sources are linked automatically, only if
these are connected.)
Turns your TV or any other programmed equipment on or
off, depending on the mode.
RATIO Change the aspect ratio. _/_p.45
+/- _:_ Adjust brightness on screen.
_ It turns to the default settings brightness by changing
mode source.
THUMBSTICK Navigate the on-screen menus and adjust the system set-
(Up/Down/Left
Right) tings to your preference.
ENTER Accepts your selection or displays the current mode.
VOLUME UP
/DOWN
MUTE
FLASH BACK
CHANNEL
UP/DOWN
Increase/decrease the sound level.
Switch the sound on or off. _/_p.27
Tune to the last channel viewed.
Select available channels.
NUMBER button
FAV
- (DASH)
Input the channel number.
Scroll through the programmed Favorite channels. _ p.30
Used to enter a program number for multiple program
channels such as 2-1,2-2,etc.
lO