Zenith Z42P3 Installation And Operation Manual page 17

I I
Installation
= To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
= Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides
of the screen may remain visible on the screen.
VCR
( AUDI L I C
Lj _
@ Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow.
Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner's manual.)
Select AVl input source using the INPUT button
on the remote control.
- If connected to AV IN2. select AV2 input source.
If you have a mono VCR. connect the audio cable from the VCR to the AUDIO LiMONO jack of the
set.
17
I
I