Zenith Z42P3 Installation And Operation Manual page 22

Installation
® ®
®@
DVI-DTV OUTPUT R_ AUDIO _L
Digital Set-top Box
Connect the DVI output of the digital set-top box to the HDMI IN I(DVI) jack on the set
Connect the audio outputs of the set-top box to the AUDIO IN(RGB/DVl) jack on the set.
Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.)
Select HDMII/DVI input source with using the INPUT button on the remote control.
If the digital set-top box has a DVl output and no HDMI output, a separated audio connection is nec-
essary.
If the digital set-top box supports Auto DVl function, the output resolution of the digital set-top box will
be automatically set to 1280x720p.
If the digital set-top box does not support Auto DVl. you need to set the output resolution appropri-
ately. To get the best picture quality, adjust the output resolution of the digital set-top box to
1280x720p.
22