Front Panel; Remote Control - JVC RX-DV31SL Instructions Manual

Press 0/I STANDBY/ON on the front panel or
doll AUDIO on the remote control.
On the front _)anel From the remote control
The STANDBY lamp goes off and the illumination lamp lights
up.
The current source name appears on the display.
• If "DVD" is the current source, "READING" appears while
the unit is detecting the type of the loaded disc (see page
32).
Playback starts automatically when you load some DVD
VIDEO.
"NO DISC" appears on the display when no disc is
loaded.
To turn off the power (into standby)
Press dollSTANDBY/ON on the front panel or doll AUDIO on
the remote control again.
The illumination lamp goes off and the STANDBY lamp lights
up.
Note:
• A small amount of power is consumed even in standby mode. To
turn off the power completely, unplug the AC power cord,
Press one of the source selecting buttons.
On the front _)anel
D_ DB8 VCR TV TA_=_DR _i_M
E ]
From the remote control
END "#OR DB8 "iV
No_s:
• When you have connected some digital components using the
digital terminals (see page 11), register the digital input terminal
setting (see "Digital input (DIGITAL IN) terminals" on page 25) and
digital input mode setting correctly (see "Selecting the Analog or
Digital Input Mode" on page 14). Source name and "DIGITAL"will be
shown on the display when you select the source.
You can use only one of the buttons--TAPE or CDR--whichever
the source name is activated (see "Changing the Source Name" on
page 13).
On the front uanel
To increase the volume,
._._. _oLu._ '_,
turn MASTER VOLUME clockwise. //// _
TO decrease the volume, ill }1)
turn MASTER VOLUME counterclockwise.
From the remote control
VOLUME
TO increase the volume,
press and hold VOLUME +.
To decrease the volume,
press and hold VOLUME .
CAUTION:
Always set the volume to the minimum before starting any
source. If the volume is set at a high level, the sudden blast of
sound energy can permanently damage your hearing and/or
ruin your speakers.
Notes:
• The volume level can be adjusted within the range of"O" (minimum)
to "50" (maximum),
• When "DVD'is selected as the source with your TV turned on, the
volume level indication appears on the TV
FM./AM 3APE CDR _L;T _
DVD
DBS
VCR
TV
TAP_CDR
TAPE'_
CDR •
FM/AM
Select the builtqn DVD player.
Select the DBS tuner.
Select the VCR.
Select the TV tuner.
Select the cassette deck or the CD recorder
(front panel ONLY).
Select the cassette deck (remote control
ONLY).
Select the CD recorder (remote control ONLY).
Select an FM or AM broadcast.
12