Digital Connection - JVC RX-DV31SL Instructions Manual

From the remote control ONLY MUTING
Press MUTING to mute the sound.
\-
"MUTING" appears on the display and the volume turns off
(the volume indication goes off).
. When "DVD" is selected as the source with your TV turned
on, "VOLUME " appears on the TV.
_¢_t_Lane
[] [] j... ; J ..j- .j. J ;.-'.
llll I I I PJI"J
J ; "..' J .J. J ; "..J
To restore the sound
Press MUTING again.
. Pressing VOLUME + or on the remote control (or turn
MASTER VOLUME on the front panel) also restores the
sound.
To check or change the remaining time until the shut-off
time
Press SLEEP once.
• The remaining time (in minutes) until the shut-off time
appears.
To change the shut-off time
Press SLEEP repeatedly.
To cancel the Sleep Timer
Press SLEEP repeatedly until "SLEEP 0" appears on the
display. (The SLEEP indicator goes off.)
• Turning off the unit also cancels the Sleep Timer.
Note:
• If Auto Standby (see page 56) and Sleep Timer are used at the
same time, the one with the earlier shut-off time will turn off the
unit,
From the remote control ONLY
Press DIMMER to dim the display.
DIMMBq
. Each time you press the button, the display and illumination
lamp dim and brighten alternately.
From the remote control ONLY
Press SLEEP repeatedly.
SLEEP
The SLEEP indicator lights up on the display.
. Each time you press the button, the shut-off time changes
as follows:
SLEEP indicator
[] [] ...............
, , , , ,, ., .._
•-. J p" ,-,, p-
ij
ib
•.." hm hm h... I J. _ _:_
When the shut-off time comes
The unit is turned off automatically.
When you have connected digital source components using
both the analog connection and the digital connection
methods (see pages 9 to 11), you can select the input mode.
• Before selecting the digital input mode, register the digital
input terminal setting correctly (see "Digital input (DIGITAL
IN) terminals" on page 25).
Note:
• You cannot change the input mode when selecting "DVD"as the
source. Digital input is always used for the built-in DVD player
I Press one of the source selecting buttons
(DBS, TV, or CDR) for which you want to
change the input mode.
2 Press INPUT ANALOG/DIGITAL (INPUT ATT.)
on the front panel or ANALOG/DIGITAL
INPUT on the remote control.
_ I_L_LOG/DIGffN.
On the front Danel From the remote control
The current input mode appears on the display.
. Each time you press the button, the input mode
alternates between the analog input ("ANALOG") and
the digital input ("DGTL AUTO").
DIGITAL AUTO indicator
[] [] I"..". "I" ; .". I ; "I" .".
' '" ' ' '""" 15
i.." :...i i "... r"i :...: i :..:
TQ BE CONTINUED TQ THE NEXT PAGE
14