Table of Contents
Advertisement
PlayingBackCDs(CD/CD-R/CD-RW)
Continued
II_
This unit has been designed
to playback
the following
CDs:
• CD (Audio CD)
• CD-R (CD-Recordable)
• CD-RW (CD-ReWritable)
Continued
use of irregular
shape CDs
(heart-shape,
octagonal,
etc.) can damage
the unit.
x@
x@
When playinga CD-R or CD-RW
User-edited
CD-Rs
(CD-Recordable)
and CD-RWs
(CD-ReWritable)
can be played back only if they are already
"finalized."
• You can play back your original
CD-Rs
or CD-RWs
recorded
in music CD format.
(However,
they may not be
played back depending
on their characteristics
or recording
conditions.)
• Before playing
back CD-Rs
or CD-RWs,
read their
instructions
or cautions
carefully.
• Some CD-Rs or CD-RWs
may not be played back on this
unit because
of their disc characteristics,
damage
or stain
on them, or the player's
lens is dirty.
• CD-RWs
may require a longer readout time. This is caused
by the fact that the reflectance
of CD-RWs
is lower than for
regular CDs.
Loading CDs
On the unit ONLY:
1
Press _ for the disc tray
(CD1, CD2, and CD3) you
want
to load a CD onto.
The unit automatically
turns on
and the disc tray comes out.
2 Place a disc correctly on the circle of the disc
tray, with its label side up.
4
Repeat
steps
1 to 3 to place other
CDs.
_When
loading more than one CD continuously
When you press A for the next tray you want to place another CD
onto, the first disc tray automatically closes and then the next tray
comes out.
About the CD ready lamps
Each CD ready lamp corresponds
to the disc tray of the
same number.
• When
and why they light up?
- When you turn on the unit for the first time after
plugging
into a wall outlet, all CD ready lamps (CD1
READY,
CD2 READY,
and CD3 READY)
lights up.
From the next time on, CD ready lamp(s)
light(s) up
according
to the previous
condition.
- Each time you press the CD eject buttons--&
(CD1,
CD2, and CD3), the corresponding
CD ready lamp
lights up.
When
and why they go of_.
Only when the unit detects there is no CD loaded on
the tray, the corresponding
CD ready lamp goes off.
("NO DISC 1," "NO DISC 2," or "NO DISC 3"
appears
on the display.)
When
and why they flash?
The corresponding
CD ready lamp flashes during
playback
and pause.
I
CORRECT
INCORRECT
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3 Press the same _ you have
pressed in step 1.
The disc tray closes.
-16-
Advertisement
Table of Contents
