Table of Contents
Advertisement
q
Use either the teIevision's
own tuner or a cable box to select channels. Set this switch to TV to
operate the television's
built-in tuner. Move the switch to CATV to operate a cable box.
Note:
See page 16 for information
on programming
your remote for cable box operation.
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand
VCR*s. For any other
manufacturer's
brand VCR, please see the code chart and instructions
on page 17.
• The remote is preset with the code 000 to control JVC-brand
DVD ptayers. For any other
manufacturer's
brand DVD player, please see the code chart and instructions
on page 18.
q
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward,
stop, pause, channet scan, TWVCR,
power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand
VCR*s. For any other
manufacturer's
brand VCR, ptease see the code chart and instructions
on page 17.
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward,
stop, stilt/pause, previous/next,
tray open/close,
power on, and power off.
Move the setector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand
DVD players. For any other
manufacturer's
brand DVD player, please see the code chart and instructions
on page 18.
All remote control buttons are illuminated,
except for the TV/CATV slide switch, VCR/DVD
slide
switch and LIGHTbutton.
Press the LIGHTbutton to turn the illumination
on for 4 seconds.
Advertisement
Table of Contents
