Table of Contents
Advertisement
CabletSateHite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the POWERand RETURN+buttons.
Hold for at least three seconds and release.
3) Press the POWERbutton on the remote, and see if the cable or satellite box responds.
4) If there was a response, press RETURN+.The codes are now set. tf there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press RETURN+to exit.
VCRIDVD Search Codes Function
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR" or
"DVD'.
2) Press the VCR or DVD POWERand RETURN+ buttons.
Hold for at least three seconds and
release.
3) Press the VCR or DVD POWERbutton, and see if the VCR or DVD responds.
4) tf there was a response, press RETURN+.The codes are now set. If there was no
response, repeat Step 3. tf you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD ptayer), and there is no response, use the remote control that came with your
equipment.
5) Press Return+ to exit.
Advertisement
Table of Contents
