Page 1
AV-32X4BA COLOUR TELEVISION INSTRUCTIONS LCT1674-001A-H...
Page 3
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ZOOM function... 12 3D CINEMA SOUND function... 14 Displaying the current time ... 14 Return to TV channel instantly... 14 Operating a JVC brand VCR or DVD player ... 14 Teletext function ...15 Basic operation ... 15 Using the List Mode ... 15 Hold...
Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected.
Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on- screen display to make the initial settings. 1 Press the Main power button on the The Power lamp lights, and the JVC logo is displayed.
Page 7
You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels in a short period of time. For details of the ACI function and how to use it, refer to “Using the ACI function”...
TV by a fully wired SCART cable. A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the features described below.
Page 9
TV: • When recording images from an external device connected to the TV. • When recording a TV channel after it has been unscrambled on a decoder. • When recording a TV channel by using the TV’s output because that TV channel cannot be properly received on the VCR’s...
TV buttons and functions Refer to the pages in parentheses for details. 1 Main power button (4, 9) 2 Power lamp (4, 9) 3 Remote control sensor 4 r (Volume) button (9) 5 P p buttons/ q buttons (9) 6 Headphone jack (mini jack) (39)
Turn the Main power on Press the Main power button on the The Power lamp lights red and your TV is in the standby mode. To turn the Main power off: Press the Main power button again. The Power lamp goes off.
Press the # # (standby) button to turn the TV on or off. When the TV is turned on, the power lamp dims slightly. • The power can be turned on by pressing the b button, 6 buttons or Number buttons.
(PR) with the CHILD LOCK function set, the n (CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 27. • If the picture is tilted, correct it. See “PICTURE TILT”...
• If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen. • This TV set has a function which can automatically change over the input according to a special signal output from an external device.
Page 15
FULL: This mode uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. Use for pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), you can restore their original dimensions.
Operating a JVC brand VCR or DVD player You can operate a JVC brand VCR or DVD player. Pressing the button having the same appearance as the original remote control button of a device makes the function work in the same way as the original remote control.
TV and text mode 6 buttons, Number buttons broadcasts, consult your local dealer or the teletext station. in the TV and text mode or Text mode. viewing a teletext programme. country which was set on the COUNTRY menu. If characters on a...
Teletext function 3 Press and hold down A A A A (Store) button The four page numbers blink white to indicate that they are stored in memory. To call up a stored page: 1 Press the B B button to engage the List mode 2 Press a colour button to which a page has been assigned...
H (Cancel) button to return to a teletext page when the page number is on the screen • The TV mode cannot be resumed even by pressing the H (Cancel) button. A TV programme is temporarily displayed instead of the teletext programme.
Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully. Basic operation 1 Press the a a button to display the MENU (main menu) •...
PICTURE SETTING Refer to “Using the TV’s menu” (see page 18) for details of displaying the menu. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharpness. STANDARD: Standardizes picture adjustment.
You can choose from the three DIGITAL VNR function settings of AUTO, MIN and MAX. The TV and external input may be given different DIGITAL VNR settings. AUTO: The TV will automatically adjust the level of...
MAX: The level of DigiPure effect is set to the maximum. If you set the DigiPure Pro function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX. • The MAX setting is not suitable for low- quality pictures which contain a lot of noise.
PICTURE FEATURES 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a a button 2 Press the 6 6 buttons to choose a ZOOM mode.
SOUND SETTING Refer to “Using the TV’s menu” (see page 18) for details of displaying the menu. SOUND SETTING STEREO/ BASS TREBLE BALANCE HYPER SOUND BACK D0019-EN STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
3D CINEMA SOUND Refer to “Using the TV’s menu” (see page 18) for details of displaying the menu. Adjust the 3D CINEMA SOUND effect. For details on how to turn 3D CINEMA SOUND on and off, read “3D CINEMA SOUND function” (see page 14).
Preparation: • At first, read the Device Instruction Manual and “Additional preparation” on page 39 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that an S-VIDEO signal (Y/C signal) can be output to the TV.
EXT-2 terminal. You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.
Refer to “Using the TV’s menu” (see page 18) for details of displaying the menu. SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a...
Page 30
TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen. 5 Press the blue button and set the CHILD LOCK function.
• If you have not connected a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, setting this function to “ON” by mistake causes the picture/ sound of a TV channel you are currently viewing not to be issued. FEATURES...
You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels in a short period of time. For details of the ACI function and how to use it, refer to “Using the ACI function”...
TV channel name (ID) to the Programme number (PR) in which the TV channel has been registered. • If a TV channel you want to view is not set to a Programme number (PR), manually set it using the MANUAL function.
Page 34
(PR) of a TV channel. This function registers a Channel name (ID) to a TV channel. INSERT: This function adds a new TV channel in the current Programme numbers (PR) list by using the CH/CC number. • You cannot use the INSERT function if you do not know a Channel number of a TV channel.
Page 35
Channel name (ID) to the TV channel. INSERT Preparation: • A CH/CC number unique to this TV and corresponding to the Channel number of a TV channel is required. Find the corresponding CH/CC number from a table “CH/CC numbers”...
Page 36
TV channel appears on the screen. • The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a picture in the no-signal state appears.
Page 37
4 Press the green or red button to search for a TV channel Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. 5 Press the green or red button repeatedly until the TV channel you...
Additional menu operations Using the ACI function This TV has an ACI function which decodes the ACI (automatic Channel Installation) data. Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly according to the data from the cable TV station.
When the T-V LINK menu is changed over to another menu: The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.
When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT- 2) function to unscramble the scrambled TV channels. 1 Turn on the Decoder power 2 Display the TV channel capable of...
• Turn off all the devices including the TV. • The “Specifications” on page 45 contains the details of the EXT terminals. If you are connecting a device not listed in the following connection diagram, see the table to choose the best EXT terminal.
TV. You can use external front speakers to listen to the TV sound instead of the TV speakers. Before connecting anything: • Read the manuals provided with the amplifier and speakers.
CH/CC numbers When you want to use the INSERT function on page 33, find the CH/CC number corresponding to the Channel number of the TV channel from this table. Channel CH 02 E2, R1 CH 40 CH 03 E3, ITALY A, AU1...
• After you have followed the Troubleshooting description or the operating description of the functions concerned without any success, remove the AC plug from the AC outlet and request a repair of your TV. Do not attempt to repair the TV by yourself or remove the rear cover of the TV.
• Have you attempted to use the remote control at the sides or rear of the TV or at a location more than seven meters apart from the TV location? Operate the remote...
Page 46
Troubleshooting • If you bring a magnetised device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen. In this case, keep the device apart from your TV. If the speakers causes such phenomena, use the magnetic-shielded speakers instead.
AAA/R03 dry cell battery × 2 Design and specifications subject to change without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this constitutes an infringement of copyright.