Table of Contents
Advertisement
Ifyou want torecord toan SD card, the
following
three operations
need tobe
performed.
• Operations
are guaranteed
on the following
SD cards.
Video recording:
Class 6compatible
SDHC
card
Still image recording:
Panasonic,
TOSHIBA,
SanDisk,
ATP ( 128MB
to4GB) or SDHC
card ( 4GB)
• Ifother media are used, they m ay f ail to
record data c orrectly,
orthey m ay l ose d ata
that had already
been r ecorded.
• MultiMediaCards
are not supported.
• Files infull h igh-definition
picture quality
cannot berecorded
onan SD card.
• Cards used torecord video on this camera
cannot beplayed back onother devices.
[ 0 Insert an SD card
]
Preparation:
Set the power/mode
switch to OFF.
| Open the SD card cover.
Bottom
of the
Camera
2 Firmly insert the card with its clipped
edge first.
Clipped
Edge
3 Close the SD card cover.
• To remove
an SD card
Push the SD card once.
After the card comes
out a little, pull it out.
• Insert and remove the SD card only while
the power is turned
off. Otherwise,
data on
the card may be corrupted.
• Do not touch the terminal
on the reverse
side of the label.
0 Change the recording medium
The camera is programmed to record on the
built-in hard disk when it is shipped from the
factory. You can change the recording medium
to SD card.
Set [REC MEDIA FOR VIDEO] and
[REC MEDIA FOR IMAGE] to [SD].
(_ pg. 68, 69)
Video picture
quality
(_
pg. 68) will
automatically
be set to [SP].
O Format
an SD card when
using
it for
the first
time
This will also ensure
stable speeds
and
operation
when accessing
the SD card.
Select
[EXECUTE]
in [FORMAT
SD
CARD]
to format
the card.
(_f pg. 72)
iiiiiiiiiiiiiiiiiiiiiiil
iiiii_!;i!;i!;
lg
Advertisement
Table of Contents
