Recording Mode Setting; Tape Length Setting - JVC GR-AXM225 Instructions Manual

Se[ed Whr_eel
SP/EP Recording
Mode Button
MENU Button
Recording M odeSetting
Set depending on your preference.
U et tile Power Switch to "AUTO" or "PRO.". Press SP/
EP for more than 1 second. "SP" (Standard Pby)
provides higher picture and srlund quality and is better
for dt bb iS, while "EP" (Extended Play) is more
ecollomical, providil/g three tirnes the recording time.
NOTE:
It the recording mode is switched durirlg recordirlg, the
playback picture will be blurred at the switchirlg poirlt.
Viewfinder
Display
I-
.j.
h indicator
Recording mode
indkator
Menu Screen
TAPE LENGTH
Setting Menu
TapeLength Setting
Set the tape length according to the length of the tape
/Ised.
Set the Power Switch to "PRO.", then press MENU.
Rotate the Select Wheel to move the highlight bar to
"TAPE LENGTH", then press it. The TAPE LENGTH
Setting Menu appears.
Rotate the Select Wheel to move the highlight bar to
the correct tape length setting. T20=20 minutes of
recording time, T30= _0 minutes, T35=35 minutes,
and T40=40 minutes (in SP).
• To return to the previous setting, rotate the Select
Wheel to move the highlight bar to "EXIT".
Press the Select Wheel. The Menu Screen reappears
with the highlight bar on "RETURN". Press the Select
Wheel again to close the Menu Screen.
NOTE:
The tape remairlirlg time (_ / pg. 14) cli_played in the
viewfinder is correct only if the c_;rrect tape length has
been selected.