Brother MFC-9320CW - Color LED - All-in-One Quick Setup Manual page 29

For Wireless Network Users
18
Confirm your network environment (Infrastructure Mode)
The following instructions will offer two methods for installing your Brother machine in a wireless network
environment. Both methods are for infrastructure mode, using a wireless router or access point that uses DHCP
to assign IP addresses. Choose a configuration method and proceed to the page indicated.
a
If your wireless router/access point does not support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™,
write down the wireless network settings of your wireless access point/router.
IMPORTANT
If you do not know this information (Network Name, WEP key, WPA2-PSK (Pre-Shared Key), LEAP or EAP-
FAST) you cannot continue the wireless setup. You should see the documentation provided with your
access point or wireless router, consult the router manufacturer, or your system administrator.
Network name:(SSID, ESSID)
Communication Mode
Infrastructure
1
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-
Personal). WPA2-PSK(TKIP), WPA-PSK(TKIP or AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this information you should see
the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII: Uses 5 text characters
64-bit Hexadecimal: Uses 10 digits of hexadecimal data
128-bit ASCII: Uses 13 text characters
128-bit Hexadecimal: Uses 26 digits of hexadecimal data
3
This is supported for WPA-PSK only
4
Encryption key, WEP key, Passphrase
For LEAP and EAP-FAST, record the User Name and Password
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Infrastructure
Now go to
b
If your wireless router/access point supports automatic wireless (one-push) setup (SecureEasySetup™, Wi-Fi
Protected Setup or AOSS™)
Now go to
Authentication method
Open system
Shared key
1
WPA/WPA2-PSK
LEAP
EAP-FAST/NONE
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
e.g. "Hello" (this is case sensitive)
e.g. "71f2234aba"
e.g. "Wirelesscomms" (this is case sensitive)
e.g. "71f2234ab56cd709e5412aa3ba"
Authentication method
WPA2-PSK
Encryption mode
2
WEP
NONE
2
WEP
AES
3
TKIP
CKIP
AES
TKIP
Encryption mode
AES
4
Network key
—
Network key
12345678
page 30
page 32
29