Configuring Your Machine When The Ssid Is Not Broadcast - Brother MFC-9130CW Network User's Manual

Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)

Configuring your machine when the SSID is not broadcast

a
Before configuring your machine, we recommend you write down your wireless network settings. You
will need this information before you continue with the configuration.
Check and record the current wireless network settings.
Network name: (SSID)
Communication Mode
Infrastructure
1
TKIP is supported for WPA-PSK only.
For example:
Network name: (SSID)
HELLO
Communication Mode
Infrastructure
NOTE
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press .
c
Press Network.
d
Press WLAN.
e
Swipe up or down, or press a or b to display Setup Wizard.
Press Setup Wizard.
f
When Enable WLAN? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.
g
The machine will search for your network and display a list of available SSIDs. Choose <New SSID>
using a or b.
Press OK.
Authentication method
Open system
Shared key
WPA/WPA2-PSK
Authentication method
WPA2-PSK
Encryption mode
NONE
WEP
WEP
AES
1
TKIP
Encryption mode
AES
Network key
—
Network key
12345678
3
3
3
21