Standard Cmos Features - Gigabyte GA-G41MT-D3PT User Manual

2-4

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 2 Master
 IDE Channel 2 Slave
 IDE Channel 3 Master
 IDE Channel 3 Slave
Halt On
Base Memory
Extended Memory
Total Memory
: Move Enter: Select
F5: Previous Values
Date (mm:dd:yy)
Sets the system date.
Time (hh:mm:ss)
Sets the system time.
IDE Channel 0, 2, 3 Master/Slave
IDE Channel 0 Master/Slave, Extended IDE Drive
Configure your IDE/SATA devices by using one of the three methods below:
• Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default)
• None If no IDE/SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
• Manual Allows you to manually enter the specifications of the hard drive when the hard drive
access mode is set to CHS. (For IDE Channel 0 Master/Slave only.)
Access Mode Sets the hard drive access mode. (Default: Auto)
The following fields display your hard drive specifications. If you wish to enter the parameters manually,
refer to the information on the hard drive.
Capacity Approximate capacity of the currently installed hard drive.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation cylinder.
Landing Zone Landing zone.
Sector Number of sectors.
Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard" (default).
Memory
These fields are read-only and are determined by the BIOS POST.
Standard CMOS Features
Fri, Mar 11 2011
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
2012M
2014M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 27 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup