Kyocera TASKalfa 620 Operation Manual page 33

5
6
1
2
3
DF-650(B), MT-1(B), BF-1(B), PH-4(A) AND PH-4(C) OPERATION GUIDE
Close the conveyor guide and push in the
Center-Folding Unit back to its original
position while pressing the Center-Folding
Unit installation button A.
Close the front cover.
Curled Output
If the copies ejected are curled, pull out the
pressure roller adjuster (G5) slightly and
turn it so that its projection is set into one of
the five small holes.
Grasp the front cover handle and open the
front cover.
If ejected copies are curled downward when
using a non-sorting mode, turn the pressure
roller adjuster (G5) in the direction of a
higher number.
If ejected copies are curled upward when
using a non-sorting mode, turn the pressure
roller adjuster (G5) in the direction of a lower
number.
English
A
1
2
3
4
5
1
2
3
4
5
1-29