Kyocera TASKalfa 620 Operation Manual page 29

1
2
DF-650(B), MT-1(B), BF-1(B), PH-4(A) AND PH-4(C) OPERATION GUIDE
Paper Jam in the Multi-Job Tray Unit
If a paper jam occurs in the Multi-Job Tray
Unit, follow the procedure below to remove
the jammed paper.
If there is any jammed paper in any of the
job trays, remove it without tearing it.
If the jammed paper cannot be easily
removed, open the upper cover to the
Document Finisher and remove the jammed
paper.
For further information refer to Paper Jam in
the Coupling Section on page 1-20.
English
1-25