Table of Contents
Advertisement
When
this unit is purchased,
the battery
is not charged.
Charge
the battery
before
using
this
unit for the first
time.
• The battery
will not be charged
if the power
is turned on.
• It is recommended
to charge
the battery
in a temperature
between
10 °C to 30 '_C (50 _F to
86 '_F). (The battery
temperature
should
also be the same.)
1
Connect
the AC adaptor to this unit's DC input terminal.
2
Connect the AC cable to the AC adaptor, then the AC outlet.
• For the AC cable,
plug in I_ and then I_).
• The status indicator O will flash red at an interval of 2 seconds, indicating
that charging has
begun.
•
Connecting
to the AC outlet
If you turn on this unit while charging
the battery
using the AC adaptor,
you can use the
power
supplied
from the AC outlet to power
the unit for use.
• Refer to page 113 when
status indicator
flashes
either rapidly
or slowly.
• We recommend
using Panasonic
batteries.
(-> 12, 21, 120)
• If you use other batteries,
we cannot guarantee
the quality
of this product.
• Do not heat or expose
to flame.
• Do not leave the battery(ies)
in an automobile
exposed
to direct
sunlight
for a long period
of time with doors and windows
closed.
CAUTION
Danger of explosion
if battery is incorrectly
replaced.
Replace only with the same or
equivalent
type recommended
by the
manufacturer.
Dispose of used batteries
according to the manufacturer's
instructions.
2O
VQT3E42
Advertisement
Table of Contents
