Panasonic SDR-S71PC Owner's Manual page 109

When connected by "_
_hen
connected by -'_
the USB cable, this i
unit is not detected by e
the other devices. J
hen the USB cable is
sconnected, an error
essage will appear
n the PC.
he power of the DVD 1
urner cannot be
rned on.
Ghe
sound does not "_
play back properly |
/
when a DVD disc that |
has been copied
using|
the DVD burner is |
k,played back.
fCannot
see the PDF '_
operating instructions l
/
for VideoCam Suite l
y' J
• After re-inserting the SD card into the unit. reconnect
the supplied USB cable.
• Select another USB terminal on the PC.
• Check the operating environment. (-_ 89. 99'_
• Connect the supplied USB cable again after
restarting the PC and turning on this unit again.
• When connected to other devices using only the
battery, reconnect using the AC adaptor.
• To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions
on the screen.
• When the unit is connected to the DVD burner, use
the respective AC adaptors for both this unit and the
DVD burner.
• When the scenes recorded on an SD card by setting
[AUDIO REC] to [MPEG] are copied to a DVD disc
using the DVD burner and then played back with any
other devices, sound may net play back properly.
In this case. record scenes by setting [AUDIO REC]
to [DOLBY] and then copy to the disc. Or use the
software supplied with this unit to copy the scenes.
• You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for VideeCam Suite 3.5.
109
VQT3E42