Download Print this page

Panasonic Lumix DMC-TS20 Owner's Manual page 9

Hide thumbs Also See for Lumix DMC-TS20:

Advertisement

Before Use
• Use the camera
underwater
to 5 m (16 feet) with the water temperature
between
0 °C and
40 °C (32 '_F and 104 °F).
• Do not use for scuba diving (Aqualung).
• Do not use the camera
at a depth of over 5 m (16 feet).
• Do not use it in hot water over 40 _C (104 °F) (in the bath or hot spring).
• Do not use the camera
underwater
for longer
than 60 minutes
continuously.
• Do not open or close the side door underwater.
• Do not apply shock to the camera
underwater.
(Waterproof
performance
may not be
maintained,
and there is a chance
of water
leak.)
• Do not dive into the water
holding
the camera.
Do not use the camera
in a location
where
the
water
will splash
strongly,
such as rapid flow or waterfall.
(Strong
water
pressure
may be
applied,
and it may cause
malfunction.)
• The camera
will sink in the water. Take care not to drop the camera
and lose it underwater
by
securely
placing
the strap around
your wrist or similar
measure.
Do not
open
or close
the side door
until
the sand
and
dust
is removed
by rinsing
the camera
with
water.
Make
sure
to clean
the camera
after
using
it.
• Thoroughly
wipe off any water droplets,
sand, and saline
matter on your hands,
body, hair,
etc.
• It is recommended
to clean the camera
indoors,
avoiding
places where
water spray
or sand
may fall.
After
using
it underwater,
always
clean
the
camera
rather
than
leaving
it in a dirty
state.
• Leaving
the camera
with foreign
objects or saline
matter on it may cause damage,
discoloration,
corrosion,
unusual
odour, or deterioration
of the waterproof
performance.
Rinse
with
water
with the side
door
closed.
• After use at the seaside
or underwater,
soak the unit in
fresh water
pooled
in a shallow
container
for 10 minutes
or less.
• If the zoom
button or camera
[ON/OFF]
button
do not
move
smoothly,
it may be caused
by an adhesion
of
foreign
objects.
Using
in such a state may cause
malfunctions,
such as locking
up, so wash off any
foreign
objects
by shaking
the camera
in fresh water.
• Bubbles
may come out of the drainage
hole when you
immerse
the camera
in water,
but this is not a
malfunction.
-9-

Advertisement

loading