Panasonic Lumix DMC-TS20 Owner's Manual page 50

Basic
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[2MIN.]/[SMIN.]/[10MIN.]/[OFF]
• [Auto Power Off] is set to [5MIN.] in the Intelligent Auto Mode.
• [Auto Power Off] does not work in the following cases.
-When connecting to a PC or a printer
-When recording or playing back motion pictures
-During a Slide Show
- [Auto Demo]
Set the length of time that the picture is displayed after taking the
still picture.
[ISEC.]
[2SEC.]
[HOLD]:
The pictures are displayed until one of the buttons is pressed,
...................................................................................................................................................................................................................... [OFF]
[Auto Review] is activated regardless of its setting in the following cases.
-When using Auto Bracket
-When using [Burst]
• in Intelligent Auto Mode or [Panorama Shot] in Scene Mode, the Auto Review function is fixed
to [2SEC.].
• [Auto Review] does not work when recording motion pictures.
m_m[_ _t] Reset the f e the next . I ___________________________________________________________________________________________________________ number of recording to 0001
• The folder number is updated and the file number starts from 0001.
• A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P52) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder number.
- 50-