Panasonic Lumix DMC-TS20 Owner's Manual page 35

Bas_
_ Start recording by pressing
the motion
picture button.
(_) Available recording time
(_ Elapsed recording time
• You can record motion pictures fitting each
Recording Mode.
• Release the motion picture button right after you
press it.
• The recording state indicator (red) (_ will flash
while recording motion pictures.
• When recording with [Rec Quality] set to [HD],
"Active Mode" (stabilizer for motion pictures) will
work automatically. For more details, refer to
[Stabilizer] (P92).
• For the setting of [Rec Quality], refer to P94.
_Stop recording by pressing
the the
motion picture button again.
• About the recording format for recording motion pictures
This unit can record motion pictures in MP4 format.
MP4:
This is a simpler video format best used when extensive editing is needed, or when
uploading videos to the internet.
• About the compatibility of the recorded motion pictures
Even if a compatible MP4 playback device is used, the video or sound quality of the
recorded motion pictures may be poor, or they may not be able to be played. There may
also be times when the recorded data is not displayed properly. If you experience such
issues, please play back the video on this camera.
For details on MP4 compatible devices, refer to the support sites below.
httD:flDanasonic.iDISUDDOrtlaloballcsldscl
(This Site is English only.)
- 35-