Advertisement
reAssembling
the pedestal
® Fix securely with assembly screws
_A_ (Total 4 screws).
¢_ Tighten screws firmly,
l,
I I
®
_L)
Pole
Front
Base _
reSet-up
Tighten assembly screws \_(B_ ( total 4 screws) loosely at first, then tighten them
firmly to fix securely.
Bottom
view
Rear side
Hole for pedestal
installation
Accessories
Assembly screws
(4 of each)
_ XYN5+F18FN
size (M5 x 18) (Silver)
® THEL080N
size (M5 x 30) (Black)
Poles (2)
® (L) TBLA3680
® (R) TBLA3679
_L) or (_ is printed at the
bottom of the poles.
Base (1)
@ TBL5ZX0337
(Image)
i Work on a flat surface
]
Removing
the pedestal
from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
(1_Remove the assembly screws (_ from the TV.
(2_Lift the TV from the pedestal.
(_) Remove the assembly screws @ from the pole.
Do not disassemble
or modify
the pedestal.
® Otherwise, the TV may fall over and become damaged, and personal injury may result.
(
Caution
Do not use any pedestal
other than that provided
with this TV.
® Otherwise, the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal
if it becomes
warped
or physically
damaged.
® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During
set-up,
make sure that all screws are securely
tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified
procedure.
(Above)
_ Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.
8
Advertisement
