Advertisement
Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in "Channel surf mode"
_0 Select "Edit"
(_ Select the item to edit
Favorite
Caption
Add
R
G
Proceed
to
_
next page
Go back to the previous
page
** Caption:
Changes
the station
identifier
** Favorite:
Registers
channels
to the
Favorite
List
+ Add:
Adds or skips channels
_3_Edit
Q Caption
UU_
or
(_change H D H
@set
Q
Select or edit the station identifier.
(maximum 7 characters available)
® Favorite
select
set
RETURN
Set favorite I Select the number
® Add
RETURN
Press OK to select "Yes (add)" or "No (skip)"
_-4_ Move
the cursor
to a channel
number
_5_ Select "Apply"
_select
@OK
To cancel the Edit
Check the signal strength if interference is found or freezing occurs on a digital image.
UBB
+
H D D
or
_l_change
O
channel
@OK
intensity
® If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
® Not available if "Cable" is selected in "ANT in" (see p. 27).
6_Available only for digital antenna channels.
28
Advertisement
