Advertisement
The TV automatically
goes into Standby after the selected period.
[] Press
SLEEP
repeatedly
until the desired
time
appears.
SLEEP
• It is also possible to set the time from "Sleep Timer" in the "Timer" menu
(p. 29).
• To cancel, set to "Off' or turn off the TV.
• To display the remaining time Information banner (p. 14)
• Off/15/30/60/90 (minutes)
• When the remaining time is within 3 minutes, the remaining time will be
displayed on screen.
Watchin content f rom
With the connected
equipment
turned
On
Display the Input select menu
external d evices
input label
Terminal
_
SetANT/Cable
in (p. 27)
Label
_
Enable Inputs
Edit labels
(example)
®* Input labels
You can also press the corresponding
NUMBER
button or press INPUT repeatedly to cycle through
the available inputs. If you are unsure which input to
select, wait 2 seconds between each selection.
® For your convenience,
your can edit the
inputs with labels that are easy to remember.
® During the selection,
if no action is taken for
several seconds, the 'Input select" menu
disappears.
(Press MENU-> Setup-> Inputlabels)
Operate
the connected
equipment
directly
or use the remote control
supplied
with the equipment
® For details, see the manual for the connected equipment.
16
Advertisement
