Panasonic TC-P42G10 Operating Instructions Manual page 31

Back of the TV
Cable/DSL
modem
Network Camera
Ethernet
cable
Router
Internet equipment
Set Internet setting (LAN) for
connected equipment with Internet
equipment if you need.
*You can not set Internet setting
from this TV
Display Menu
MENU
==Network Camera setting operation
Select "Network cameras list"
Network cameras list
If there is no registered camera
@
Select "Yes" to start search
_5_Set Network Camera setting
"Please refer to camera's settings and enable its
link mode. Start searching for network camera?"
"Yes" to start camera search.
® Before you start to search for a camera,
switch the camera to registration mode.
(For this operation, please refer to
the operating manual for the Network
camera.)
@ Search condition also depends on
"Network setting" (p.44)
"Remove camera information?"
=_,"Yes" to delete camera information.
"Disconnect to camera?"
@"Yes" to delete camera connection.
"Disconnected" will be displayed in
"Status"
"Set this camera as default camera?"
"Yes" to set to the default use.
Displayed "(Default)" next to camera
name.
(Available only when reconnecting)
"Connect to Camera?
"Yes": "Connect" will be displayed
in "Status" (Attach up to 8 Network
cameras simultaneously)
@
Z
o
C)
3
31