Table of Contents
Advertisement
WARNING:
THE OVEN AND ITS PARTS ARE HOT.
CLEANING THE OVEN.
WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE SERVICING THE OVEN.
LUBRICATION
Every 6 weeks, lubricate the door bearing. Use Bostik Never-Seez, Catalog # NHTC-14, which is a
lubricant that may be used under high temperature conditions. The grease fitting is located on the back
of the door bearing (Fig. 8).
VENT
Annually, when the oven is cool, check the flue and clear any obstructions.
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning this oven, contact the Vulcan Service Agency in
your area (refer to listing supplied with the oven), or Vulcan Company Service Department at the
address or phone number shown on the front cover of this manual.
MAINTENANCE
Fig. 8
— 15 —
USE CARE WHEN OPERATING AND
Grease Fitting
P L - 5 2 6 2 6
Advertisement
Table of Contents
