Getting Connected - VocoPro CDG-8800 PRO Owner's Manual

Getting Connected

Connecting the external controller to the player
Using the included remote cables connect Remote
1 on the remote to Main Unit 1 on the player and
connect Remote 2 to Main Unit 2.
Connecting to an Audio System (Mixer, Amp, etc.)
Using L/R RCA cables, connect the AUDIO OUT on each CDG-8800 PRO deck to the AUDIO IN on a mixer or amp.
+ +
- -
PKJ 9090 PRO (not included)
Connecting to a TV or Monitor
Using an RCA cable (yellow), connect the VIDEO OUT on each CDG-8800 PRO deck to the VIDEO IN on a TV or
monitor. NOTE: If your TV or monitor has only one video input, you may need a video switching device or a mixer
with video switching.
7
LTV-5 (not included)